TEKNA®, CVi®, and PLUS® High Efficiency Spray Guns have been approved
for use in many HVLP areas, including Los Angeles (SCAQMD).
Click here for all Regulatory Approvals and Compliance Information
for use in many HVLP areas, including Los Angeles (SCAQMD).
Click here for all Regulatory Approvals and Compliance Information
- Gravity Feed Spray Guns
- Suction Feed Spray Guns
- Pressure Feed Spray Guns
- Touch Up Guns
- Waterborne Equipment
- Airbrushes
- Disposable Cup System
- Cups & Tanks
- Air Control
- Filters & Regulators
- Hoses & Fittings
- Safety
-
Accessories
- DeWipe-Outs™
- E-Z Liners
- Whirlwind™ Filter DISPOSABLE AIR FILTER
- Gun Storage Cases SINGLE CASE & TWO GUN CASE
- Scrubs® HAND CLEANER TOWELS
- Professional Spray Gun Cleaning Kit
- Gun Cleaning Bottle
- Spray Gun Lube
- Gun Fluid Tube
- Tank Liners
- 2.7 Gal Strainer
- Automatic drain
- Coalescing Filter Element
- Element Kit
- Filter Element Kit
- KB EZ-Liner Kit
- Liner (SGII)
- Premium Paint Strainers
- Filters & plugs storage case
- Collector's Series
- Air Compressors
- Spray Booths
- StartingLine 3-Gun Auto Painting Kit
- StartingLine Detail and Touch-Up HVLP Gravity Spray Gun
- StartingLine Auto Painting and Touch Up System
- 600CC (20 FL OZ) Replacement Metal Cup
- 250CC (8.5 FL OZ) Replacement Metal Cup
- Full Size Gun Repair Kit
- Touch Up and Detail Gun Repair Kit
- 600CC Metal Cup Gasket Kit
- 250CC Metal Cup Gasket Kit
| Order No. | Model No. |
| 110265 | JGA-670 |
World Famous Fit and Feel
PLUS® Suction Gun Includes:
1.6 mm and 1.8 mm fluid tips TGC 1-qt. cup High output air adjusting valve with gauge Spray lube
PLUS® Suction Gun Includes:
| PLUS® HIGH EFFICIENCY SUCTION FEED Air Cap | |||
| #410 | |||
| Primers, base coats, clearcoats, single stage and low VOC | |||
Air Cap Pattern: |
|||
| Inlet Pressure: | 30-40 PSI | ||
| Air Flow: | 9-11 CFM | ||
| Tips: | 1.0 mm, 1.2 mm, 1.3 mm, 1.4 mm, 1.6 mm, 1.8 mm | ||
| Order No. | 192174 | ||
| PLUS® HIGH EFFICIENCY SUCTION FEED | |||||
| Order No. | Model No. | Tip Size | Technology | Pressure | Applications |
| 110265 | JGA-670 | 1.6 | High Efficiency | 30-40 PSI | Base coats |
| 1.6 | High Efficiency | 35-45 PSI | Single stages | ||
| 1.6 | High Efficiency | 35-45 PSI | High and low solids clearcoats | ||
| 1.8 | High Efficiency | 30-40 PSI | Synthetic and acrylic enamels | ||
