Basic HTML Version
Ref.
No. Description
Part
No.
Qty
1 Air Cap Retaining Ring
1
2 Slip Ring
1
3 Air Cap
1
4 Air Cap Retaining Clip
1
5 Retaining Ring Seal
1
6 Base Cap & Ring (202)
(see Chart 1)
702723 1
6 Clear Cap & Ring (909)
(see Chart 1)
702724
7 Air Cap Retaining Ring
& Seals
702725 1
8 Fluid Nozzle (see Chart 1)
1
9 Air Separator
1
*10 Air Separator Seal (kit
of 2)
702726
1
11 Air Separator & Seal Kit
702727 1
*12 Body Bushing Gasket
1
13 Body Bushing
1
14 Body Bushing & Gasket
702728 1
15 Fluid Needle (see Chart 1)
1
*16 Needle Spring
1
*17 Needle Spring Pad
1
18 Fluid Adjusting Knob
1
19 Fluid Adjusting Knob,
Spring, & Pad Kit
702729 1
*20 Retaining Clip
1
Chart 2: Air Cap Replacement Parts
Air Cap
Order No. Application Air Cap No.
Recommended
Inlet Pressure
Bar/Psi
Air Flow
Lpm/Scfm
702723 Base coats
#202 HVLP 1.2–1.5 BAR/18–22 PSI 382–434 LPM
13.5–15.5 SCFM
702724 Clearcoats
Waterborne Base
#909 HVLP 1.5–1.8 BAR/22–26 PSI 396–453 LPM
14–16 SCFM
703062 Base coats,
clearcoats
#7E7 HE 1.1–1.5 BAR/16–22 PSI
(HVLP approved areas)
1.5–2.0 BAR/22–30 PSI
(non–HVLP
approved areas)
255–312 LPM/9–11 SCFM
(HVLP approved areas)
312–368 LPM11–13
SCFM
(non–HVLP
approved areas)
Ref.
No. Description
Part
No.
Qty
21 Spreader Valve Body
1
*22 Spreader Valve Seal
1
23 Spreader Valve Adjusting
Knob
1
*24 Spreader Valve Pin
1
25 Spreader Valve Assembly 702730 1
*26 Needle Packing
1
*27 Packing Spring
1
28 Packing Nut
1
29 Packing, Spring & Packing
Nut Kit
702731 1
30 Air Valve Body
1
31 Air Valve Cage
1
32 Air Valve Poppet
1
33 Air Valve Spring
1
34 Air Valve Spring Pad
1
35 Air Valve Seal
1
36 Air Valve Assembly
702732 1
*37 Trigger Stud Screw (T20
TORX)
1
38 Trigger
1
*39 Trigger Stud
1
40 Trigger, Stud & Screw Kit 702733 1
41 Plug
1
42 Air Inlet
702734 1
43 Colour ID Ring Kit (4
Colours)
702735 1
44 Gun Body
1
*39 Trigger Stud
1
40 Trigger, Stud & Screw Kit 702733 1
41 Plug
1
42 Air Inlet
702734 1
43 Colour ID Ring Kit (4
Colours)
702735 1
44 Gun Body
1
* The TEKNA Spray Gun Repair Kit (702736)
contains all the parts indicated with an asterisk.
OTHER SALABLE PARTS /ACCESSORIES
Wrench (10 & 14mm)
702740
#202 Test Cap (HVLP)
702738
#909 Test Cap (HVLP)
702739
Spray Gun Repair Kit
702736
TEKNA Replacement 900cc
Aluminum Cup
702576
Disposable Lid Kit (2)
GFC-404-K2
Paint Filter Kit
KGP-5-K5
* Waterborne compatible when using a
plastic or disposable cup system.
Refer to Technical Bulletin: TB-1002
Includes:
• 7E7 high efficiency air cap
• HAV-555 air adjusting valve with
digital gauge
• Extra needle/nozzle set
• Gun wrench and color ID rings
• DeKups
®
Adapter (DPC-43) –
Uncupped only
TEKNA
®
Copper HE
Gravity Spray Gun
TEKNA
®
Copper HE Air Caps
#7E7
air cap
(HE)
Base coats, clearcoats
Air Cap Order/Model No
703062
9–11 CFM @ 16–22 PSI inlet
for HVLP approved areas
Air Cap
Pattern
12½"
#202
air cap
(HVLP)
Base coats (solvent)
Air Cap Order/Model No.
702723
13.5–15.5 CFM @ 18–22 PSI inlet
Air Cap
Pattern
13"
#909
air cap
(HVLP)
Clearcoats, waterborne
base coats
Air Cap Order/Model No.
702724
14–16 CFM @ 22–26 PSI inlet
Air Cap
Pattern
12"
Fluid
Tips
1.1mm, 1.2mm, 1.3mm, 1.4mm,
1.5mm
(for hot climate waterborne)
TEKNA
®
Copper HE Basecoat/Clearcoat
Gravity Feed Spray Guns
Order No. Needle/Nozzle Cup
Air Cap
703488
1.2mm, 1.3mm Uncupped
7E7
703489
1.2mm, 1.3mm 900cc Aluminum 7E7
703496
1.3mm, 1.4mm Uncupped
7E7
703497
1.3mm, 1.4mm 900cc Aluminum 7E7
NOTE:
When replacing the fluid nozzle or fluid needle,
replace both at the same time. Lightly lubricate the threads
of the fluid nozzle before reassembling. Torque 14–16 nm
(10–12 ft-lbs). Don’t over tighten the fluid nozzle. Use 10 mm
wrench supplied with gun.
Chart 1: Fluid Nozzle & Fluid Needle Replacement Parts
Fluid Nozzle
Size I.D. (mm)
Fluid Nozzle/
Needle Set No.
1.1
702711
1.2
702712
1.3
702713
1.4
702714
1.5
702715
*
HAV-555
EPA Compliant.
Approved in most
HVLP areas.
EPA and
SCAQMD
Approved
The DeKups
®
System is covered by U.S. Patent Nos. 6,820,824
and 7,374,111, owned by 3M Innovative Properties Co., and U.S.
Patent Nos. 7,380,680; 7,354,074; 7,353,964; 7,350,418; 7,344,040;
7,263,893; 7,165,732; 7,086,549; owned by Illinois Tool Works Inc.
4 Models Available!
Cupped or Uncupped
www.autorefinishdevilbiss.com
TEKNA
®
Guns and Accessories
6
703488,
703496
703489,
703497